Common Problems with Wicked Ridge Crossbow
In both archery and hunting, the Wicked Ridge crossbow excels. Although their crossbows are of the highest quality, they are nevertheless affordable for the typical hunter. Unfortunately, there are still problems with these crossbows.
Problems with the de-cocking mechanism, the bow not firing, the limbs not working, the string not working, the bow not being accurate, safety issues, and so on are all quite typical with Wicked Ridge crossbows.
Continue reading for an in-depth discussion of the common problems with Wicked Ridge crossbow and their solutions.
Common Problems with Wicked Ridge Crossbow
| Problems | Solutions |
| Limb Problems | Use the right limb; clean the limb; if needed replace it. |
| String Problems | Properly mount the bow; align the limbs properly. |
| Accuracy Problems | Verify that the main bolt is snug and that the cable saver has been placed properly. |
| Won’t Fire | Carefully press the safety and cock the bow. |
| Problems with De-cocking System | Use right mechanism to use the bow; replace the crossbow string and cables. |
| Problems with the Safety Mechanism | Stop using the bow, contact Wicked Ridge and get it fixed. |
1. Limb Problems
The crossbows of Wicked Ridge have severe problems with their limbs. The fiberglass is flaking off of both lower limbs. They resemble splinters.
The camo on the upper left limb is also coming off like it’s peeling. As though the fiberglass was delaminating, it is sharp to the touch if you rub your finger across it.
Invader, Warrior, and the Wicked Ridge RDX 400 have been noted to have limb problems.
Solution:
- Step-1: Check that the arrows for your crossbow are the right kind.
- Step-2: Verify that the string is tight and untwisted.
- Step-3: Keep the crossbow in good working order by cleaning and lubricating the limbs regularly.
- Step-4: Replace the limb and get a new one.
2. String Problems
Wicked Ridge crossbow’s string begins to rip at the cams, exposing the string beneath. And if you look closely, you’ll see that the cam is touching the string and that the right limb is splintered and delaminating.
If the strings on the crossbow are knotted or twisted, the weapon won’t fire properly.
Solution:
- Step-1: Make sure the crossbow is properly mounted before proceeding.
- Step-2: Check that the limbs are properly aligned and that the bolts and nocks are securely fastened.
- Step-3: Sometimes tweaking the bow’s settings or replacing the string will solve the issue.
3. Accuracy Problems
Some users have reported that some shots with the Wicked Ridge crossbow appear to lack the usual force.
Basically, power is quite inconsistent. When the bow is shooting “excellent”, the sound is very different than when it is not. The poor fire seems louder and less solid.
The crossbow may have been cocked incorrectly, the shooter may have failed to “steady” the crossbow against the shoulder, or the knock may not have been fully inserted.
Solution:
- Step-1: Check that the arrow is fully retracted and resting against the string.
- Step-2: Verify that the main bolt is snug and that the cable saver has been placed properly.
- Step-3: Ensure that the string is been where it needs to be on the rail.
4. Won’t Fire
The crossbows from Wicked Ridge don’t fire because the bolt does not go off.
When the safety is moved back and forth, the bolt is replaced repeatedly. The string is pulled back to make sure it is all the way back, but nothing happened. It seems like there’s no resistance when pulling the trigger, yet it still won’t fire.
If the trigger isn’t pulled all the way and the string gets caught on the dry fire inhibitor this can happen.
Solution:
- Step-1: To activate the firing mechanism, press the safety button.
- Step-2: Keep an eye on the safety switch as you cock the weapon.
- Step-3: After you’ve finished cocking the gun, you should make sure it moves by pushing down on the DFI (Dry Fire Inhibitor) lever. Your bow is cocked and off the DFI if it moves.
Note: Take it “carefully” to a pro shop so they may give it a thorough inspection. It is not to be de-cocked. Unless you’re extremely well-versed and experienced, a crossbow is not something you should mess with.
5. Problems with De-cocking System
There are problems with the De-cocking system on Wicked Ridge. Not only it doesn’t function properly but also has an annoying tendency to start spinning on its own once you begin de-cocking.
Solution:
If the de-cocking button is not depressed all the way, the crossbow will fire automatically. Check the bowstring center serving after re-cocking and shooting your crossbow.
Before shooting again, replace the crossbow string and cables if you find broken strands in the bowstring or center serving.
6. Problems With the Safety Mechanism
There have been complaints of issues with the safety system of Wicked Ridge crossbows, leading to concerns that the weapon may discharge even when the safety was engaged.
Solution:
Consumers should cease using the recalled crossbows immediately.
If the crossbow offers an unanticipated shooting hazard, contact Wicked Ridge for thorough instructions on how to inspect the weapon and directions on how to receive a free repair.
Read Also: Who Makes Cabelas Bows: Detailed Brand Information
What Majority of the Users Think About Wicked Ridge Crossbow?
Due to their low cost and high quality, Wicked Ridge crossbows are among the best hunting crossbows on the market. Although it has received mixed reviews from its customers.
An individual user remarked that Wicked Ridge crossbows are durable, quick, compact, accurate, and a decent bargain.
A user stated in general, it’s not a terrible crossbow, but the cocking string attachment is tricky to set up. He added the crossbow makes a lot of noise which is an issue.
People who have used this crossbow have also talked about a number of other problems. This includes misfires, problems with the stock, and problems with the tracking.
Most problems with Wicked Ridge crossbows come from the Wicked Ridge RDX 400, Wicked Ridge Invader, and Wicked Ridge Warrior, according to reports from different platforms and users.
Which Wicked Ridge Crossbows are the Best?
Let’s examine which Wicked Ridge crossbows are the best and most popular based on their attributes.
1. Wicked Ridge Invader HP Crossbow
This crossbow is extremely precise, with a velocity of 315 FPS and a stroke of 12.25 inches, and it has an inbuilt rope-assist cocking gear.
2. TenPoint Wicked Ridge Invader G3
The magnesium riser on this crossbow is strong and lightweight.
Misfires and dry fires are eliminated via redundant safety mechanisms. Driven with pinpoint precision. The arrows shot from this bow have a speed of 330 feet per second, and the power stroke is 13.50 inches.
3. Wicked Ridge Warrior HL
This crossbow is strong and light, with a range of up to a hundred yards, and it’s made to last a lifetime. It can fire at 300 FPS and has a 12.25-inch stroke.
Related Post: Who Makes Coleman ATV: Manufacturer Information
Frequently Asked Questions (FAQs)
What is the fastest crossbow made by Wicked Ridge?
The fastest crossbow made by Wicked Ridge is the Fury 410 De-Cock.
How fast is a Wicked Ridge Invader?
A Wicked Ridge Invader is 400 FPS, which is an astounding 40 feet per second quicker than its predecessor.
How many models of Wicked Ridge were recalled?
The recall affects nine kinds of crossbows manufactured by TenPoint and Wicked Ridge crossbows including Wicked Ridge Warrior HL, Wicked Ridge Raider CLS, and Wicked Ridge Invader HP.
Read Also:
